Electrical Requirements - Black & Decker BHOC05 Instruction Manual

SAFETY INFORMATION

ELECTRICAL REQUIREMENTS

In the event of malfunction or insulation breakdown, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock. The appliance
must be connected to a cord having an equipment-grounding conductor and a
grounding plug. The plug must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
DANGER: Improper connection of the equipment grounding conductor can result
in a risk of electric shock. The conductor with insulation having an outer surface that
is green with or without yellow stripes is the equipment grounding conductor. If repair
or replacement of the cord or plug is necessary, do not connect the equipment-
grounding conductor to a live terminal. Check with a qualified electrician or service
person if the grounding instructions are not completely understood, or if in doubt as
to whether the appliance is properly grounded. Do not modify the plug connected to
the appliance – if it will not fit the outlet, have a proper outlet installed by a qualified
electrician.
FOR GROUNDED, CORD-CONNECTED APPLIANCE RATED LESS THAN 15A AND
INTENDED FOR USE ON A NOMINAL 120V SUPPLY CIRCUIT
The appliance is for use on a nominal 120V circuit, and should be connected to a
grounding outlet as illustrated in sketch A. A temporary adaptor, as illustrated in
sketch C, may be used to connect this plug to a 2-pole receptacle as shown in sketch
B if a properly grounded outlet is not available. The temporary adaptor should be
used only until a properly grounded outlet can be installed by a qualified electrician.
The green colored rigid ear, lug, and the like, extending from the adaptor must be
connected to a permanent ground such as a properly grounded outlet box cover.
Whenever the adaptor is used, it must be held in place by the metal screw.
NOTE: IN CANADA, THE USE OF A TEMPORARY ADAPTOR IS NOT PERMITTED BY
THE CANADIAN ELECTRICAL CODE. Ensure that the Appliance is connected
to an outlet having the same configuration as the plug.
A
Grounding pin
Cover of grounded
outlet box
Metal screw
Grounding means
C
B
Page 5