SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
MCS--4200/7200 Multi--Channel SATCOM System
Figure 6-8 (Sheet 5). Configuration Data
(g) CONFIGURATION DATA Page 6 (Figure 6-8, sheet 6):
1
Data Fields
a
Lines 4 thru 9
(1) These lines display X(0)* or X(1)* left-justified as shown in the
figure, where X represents E, F, G, H, J, and K, respectively. X(0)*
or X(1)* is determined by the states of system configuration pins
TP11E, TP11F, TP11G, TP11H, TP11J, and TP11K. Asterisks are
displayed in column 5 to indicate these pins are a coded group.
(2) Beginning in column 6, textual messages are displayed (refer to
Table 6-11) in lines 4 thru 9 (as needed), where an x indicates the
message(s) to be displayed based on the state of system
configuration pins TP11E, TP11F, TP11G, TP11H, TP11J, and
TP11K.
Honeywell International Inc. Do not copy without express permission of Honeywell.
23- -20- -35
Page 6--50
15 Jul 2006