Black & Decker BXJE200E Manual page 5

Use:
♦ Unroll the cable completely before plugging it in.
♦ Put the juicer bowl (E) on the base (F) (Inserting the
slots and rotating slightly clockwise to stop)
♦ Put the filter (D) in the middle of the juice bowl (E),
making sure it is fitted together, aligning the two points
marked
♦ Put the juice auger (C) into the filter.
♦ Put the feeding tube (B) onto the juice bowl, making
sure it is well fitted, turning to the right, toward the lock
position.
NOTES: If the auger (C) is not fully insert-
ed, the cover will not close properly. Make
sure the auger is well placed, turning and
pressing down.
♦ Put the juicer bowl on the base (no need turn it tight
clockwise).
♦ Wash the fruit and /or vegetable and cut them into
pieces that fit into the feeding tube.
♦ Please make sure that the switch is turned at "O" before
to connect to the power.
♦ Connect the appliance to the mains.
♦ Put the juicer cup and residue cup under the juice and
dregs spout.
♦ Turn the appliance on, by turning the control knob to
setting "ON".
♦ Put the pre- cut pieces in the feeding tube and gently
press them down towards the rotating filter. Only use the
aid of the pusher when necessary.
♦ In order to make the fruit go into the feeding chute with-
out getting stuck, please slice the fruit into small pieces.
NOTES: This product is only used for
extract juice.
♦ Remove the stone from the fruits such as plums, peach-
es, cherries, apricots and so on.
♦ Other fruit with soft peel should be washed before
extracting such as apples, carrots, grapes, strawberry
and so on.
♦ Never put fruit stone kernel, excessively hard foods (ice
cubes, sugar cubes), extremely fibrous food or meat into
your juicer because they would damage the filter net and
pusher.
♦ Switch "ON" stand for rotating clockwise, switch R
stands for rotating reversely, switch "O" stands for stop.
When there is some fruit stuck between filter net and
pusher, please turn the switch to speed "R" to make the
fruit exit, then turn the switch to ON for extracting.
(Original instructions)
♦ Put the fruits into the feeding chute slowly, and using the
pusher to push it.
NOTES: Please do not put your fingers
or other objects to the feeding chute is
blocked, please use the pusher or other
fruit slice to push and remove the stuck
fruit. If it still won´t work, stop the machine
and clean up the stuck fruit.
♦ Turn the switch to "O" if the juice cup or dregs jar is full;
please also turn off the machine if there is no fruit. Empty
the cup and clean the filter net and feeding chute for the
next extracting.
♦ × If the forward rotation is blocked - the reversion will be
automatic.
♦ × If it is blocked again, the reversion will be automatic.
♦ × If it stops twice in a minute - PARA. If it blocks in more
than a minute, repeat action.
CLEANING
♦ Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
♦ Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry.
♦ Do not use solvents, or products with an acid or base pH
such as bleach, or abrasive products, for cleaning the
appliance.
♦ Never submerge the appliance in water or any other
liquid or place it under running water.
♦ It is advisable to clean the appliance regularly and
remove any food remains.
♦ If the appliance is not in good condition of cleanliness, its
surface may degrade and inexorably affect the duration
of the appliance's useful life and could become unsafe
to use.
♦ Then dry all parts before its assembly and storage.
ANOMALIES AND REPAIR
♦ Take the appliance to an authorised technical support
service if product is damaged or other problems arise.
Do not attempt to disassemble or repair the appliance
yourself as this may be dangerous.
For EU product versions and/or in case that
it is requested in your country:
ENGLISH
5