Changing/Installing Batteries - RIDGID Micro IR-200 Manual

Figure 4 – Removing Battery Compartment

Changing/Installing Batteries

The micro IR-200 is supplied without a battery installed. If the
battery indicator (Figure 3) displays
be replaced. Remove the battery prior to long term storage to
avoid battery leakage.
1. Squeeze the battery clips and remove battery compartment
from the thermometer (See Figure 4). If needed, remove
battery.
999-995-066.09_REV. E
micro IR-200 Non-Contact Infrared Thermometer
, the battery needs to
9