Table of Contents
Advertisement
Below is an explanation of the different columns
Id
identification number of the event. It can be used for comparison with the
event in the NFG-8 control unit.
Date
date and time of the event
Event Type
Event Type
Confirmation
Reset
Info
Configuration
Settings
Alarm
Fault
Emergency
Serial Track
Event
even more detailed indication of the type of event
Value
value of gas concentration (in case of alarm event)
Units
unit of measured value
User
user identifier in case of "user" event (Ack, Reset, Login etc.)
Hardware device that generated the event (Rio Input module, gas detector,
Rio Out module, etc.).
PAGE - 30
NOTIFIER ITALY
Fig. 4.4.4.i) Events history screen
type of event. Event types can be the following
Description
Capturing / silencing an event
Resetting an event
Events such as user login and logout, return of an alarm, etc.
Error in the configuration of the central unit
Parameters have been modified in the control unit (e.g. detector
alarm threshold).
Alarm Event
Fault Event
Emergency Event (typically a power failure)
Event concerning data transfer on serial port (data loading and
unloading from PC)
Installation and Operation
Manual
Rev A.3
Doc. M-040.1-NFG8-EN
NFG-8
NFG-8_manu-inst_ITA
Advertisement
Table of Contents
