Table of Contents
Advertisement
screen Select the control unit to be programmed:
NFG-8 NFG-8 + NFG-16R
In case you do not know the model of the central unit you have to program, it is
possible through the option DETECT that the software automatically sets the model of
the central unit. In this case the control unit must be connected to the computer.
PAGE - 20
NOTIFIER ITALY
Fig. 4.3.1 a) Central selection screen
Fig. 4.3.1 b Control unit selection
Installation and Operation
Manual
Doc. M-040.1-NFG8-EN
Rev A.3
NFG-8
NFG-8_manu-inst_ITA
Advertisement
Table of Contents
