High-Profile Pattern Drive Track; Lubrication - Yamaha FX Nytro FX10A Owner's Manual

Table of Contents

Advertisement

Periodic maintenance and adjustment
1. Slide runner
2. Wear limit height
Slide runner wear limit height:
10.5 mm (0.41 in)
ECS00350
NOTICE
Ride on fresh snow frequently. Operating
on ice or hard-packed snow will rapidly
wear the slide runners.
ESU12181

High-profile pattern drive track

FX10M53S/FX10M62S
This snowmobile is originally equipped with a
57 mm (2.25 in) high-profile pattern drive
track specifically for use in deep snow riding
conditions.
Therefore, avoid prolonged operation on hard
surfaces such as ice, hard-packed snow, dirt,
etc., to extend the life of the track and slide
runners.
74
ECS00610
NOTICE
Only use in deep snow riding condi-
G
tions.
Operation on areas with light snowfall,
G
ice, hard-packed snow, dirt, or grass will
result in rapid wear or damage to the
track and slide runners from lack of
snow which serves as a lubricant.
ESU12198

Lubrication

Lubricate the following points with the speci-
fied grease.
EWS00511
WARNING
Do not grease the throttle cable because it
could become frozen, which could cause
loss of control. Apply a dab of grease onto
the cable end only.
TIP
For parts equipped with a grease nipple, use
a grease gun.
Lubricants:
Brake lever:
Silicone grease
Other lubrication points:
Low-temperature grease
1. Lubrication point
1

Advertisement

Table of Contents
loading

Table of Contents