Parking Brake Lever; Shift Lever - Yamaha FX Nytro FX10A Owner's Manual

Control functions
2. While lightly pushing the brake lever in di-
rection (a), turn the adjusting bolt to set
the brake lever to the desired position.
1. Locknut
2. Adjusting bolt
3. Tighten the locknut securely after adjust-
ing the brake lever position.
ESU10581

Parking brake lever

When parking the snowmobile or starting the
engine, apply the parking brake by moving the
parking brake lever to the left.
1. Parking brake lever
To release the parking brake, move the park-
ing brake lever to the right.
16
ESU13032

Shift lever

The shift lever is used to put the snowmobile
into forward or reverse. Before shifting, wait
for the snowmobile to come to a complete
stop with the engine idling. Pull the shift lever
out, slide it to "FWD" or to "REV" until it stops,
and then push it back in.
1
1. Shift lever
1. Pull out.
2. Slide to "FWD" (forward).
3. Push in.