Yamaha R3 Owner's Manual page 35

To install the passenger seat
1. Insert the projections on the front
of the passenger seat into the seat
holders as shown, and then push
the rear of the seat down to lock it
in place.
1
2
2
1. Projection
2. Seat holder
2. Remove the key.
Rider seat
To remove the rider seat
1. Remove the passenger seat.
2. Remove the center cover by re-
moving the screws.
Instrument and control functions
2
1
1. Center cover
2. Screw
3. Remove the rider seat by remov-
ing the bolts. Lift the rear of the
rider seat and pull it backward.
2
1
1. Rider seat
2. Bolt
4-16
To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown, and then place the seat
in the original position.
1
2
1. Projection
2. Seat holder
2. Install the rider seat bolts.
3. Install the center cover by install-
ing the screws.
4. Install the passenger seat.
TIP
Make sure that the seats are properly
secured before riding.
4