Yamaha R3 Owner's Manual page 27

Flashing pattern: turn the indicator
light on or off, and when set to on
select how the indicator will illumi-
nate.
Activation point: select the engine
speed at which the indicator light
is activated.
Deactivation point: select the en-
gine speed at which the indicator
light is deactivated.
Brightness: adjust the brightness
of the indicator light.
To adjust the shift indicator light
1. Turn the main switch off.
2. Hold the "SELECT"
pushed.
3. Turn the main switch on and re-
lease the "SELECT" button after
five seconds. The shift indicator
light can now be adjusted.
To set the flashing pattern
1. Push the "RESET" button to select
one of the following flashing pat-
tern settings:
On: the indicator light stays
on when activated. (This set-
ting is selected when the indi-
cator light stays on.)
Flash:
flashes when activated. (This
setting is selected when the
indicator light flashes four
times per second.)
Off: the indicator light is deac-
tivated; in other words, it
does not come on or flash.
(This setting is selected when
the indicator light flashes
once every two seconds.)
button 2. Push the "SELECT" button to con-
firm the selected flashing pattern.
The shift indicator light changes to
the activation point setting mode.
The tachometer will show the current
setting r/min for the activation point
and deactivation point setting modes.
Instrument and control functions
To set the shift activation point
TIP
The shift indicator light activation point
can be set between 7000 r/min and
the indicator light
13500 r/min. From 7000 r/min to 12000
r/min, the indicator light can be set in
increments of 500 r/min. From 12000
r/min to 13500 r/min, the indicator light
can be set in increments of 200 r/min.
1. Push the "RESET" button to select
2. Push the "SELECT" button to con-
To set the deactivation point
TIP
4-8
the desired engine speed for acti-
vating the indicator light.
firm the selected engine speed.
The control mode changes to the
deactivation point setting mode.
The shift indicator light deactiva-
tion point can be set between
7000 r/min and 13500 r/min. From
7000 r/min to 12000 r/min, the in-
dicator light can be set in incre-
ments of 500 r/min. From 12000
4