Yamaha MT-09 Owner's Manual page 36

Instrument and control functions
Setting level 1 provides the least
amount of system intervention and set-
ting 3 most strongly reduces the rate of
wheel lift.
OFF turns LIF off.
"Vehicle Setting"
Vehicle Setting
5
BC Setting
QS Setting
The vehicle setting module allows you
to adjust setting for the BC and QS
systems.
BC
The brake control system has two set-
tings, BC1 and BC2. Select BC1 when
only standard ABS is desired. Select
BC2 to have the brake control system
further regulate brake pressure while
km/h
cornering to suppress lateral wheel
slip.
TIP
For skilled riders and when riding at the
track, due to varying conditions, the
BC2 brake system may engage sooner
than expected relative to your desired
cornering speed or intended cornering
line.
BC Setting
BC 2
km/h
5-15
QS
QS Setting
QS ON
QS ON
The quick shift system indicators are
divided into QS and QS
QS and QS are not linked and
can be independently turned on or off.
QS can be set to ON or OFF.
OFF turns the respective upshift or
downshift function off, and the clutch
lever must then be used when shifting
in that direction.
TIP
If the QSS setting cannot be changed:
turn the engine off with the gear posi-
tion set to neutral, then change the set-
ting.
km/h
sections.