Yamaha MT-09 Owner's Manual page 30

Instrument and control functions
TIP
This model uses a thin-film-transistor
liquid-crystal display (TFT LCD) for
good contrast and readability in vari-
ous lighting conditions. However, due
to the nature of this technology, it is
normal for a small number of pixels to
be inactive.
5
WARNING
Stop the vehicle before making any
setting changes. Changing settings
while riding can distract the opera-
tor and increase the risk of an acci-
dent.
Speedometer
The speedometer shows the vehicle's
traveling speed.
TIP
The display can be switched between
kilometers and miles. See "Unit" on
page 5-16.
Tachometer
The tachometer shows the engine
speed, as measured by the rotational
velocity of the crankshaft, in revolu-
tions per minute (r/min).
NOTICE
Do not operate the engine in the ta-
chometer red zone.
EWA18210
Red zone: 10600 r/min and above
Vehicle information displays
1. Vehicle information displays
The two vehicle information displays
can be individually set to show the fol-
lowing items:
 ODO: odometer
 F-TRIP: fuel reserve tripmeter
 TRIP1: tripmeter
 TRIP2: tripmeter
 F.AVE: average fuel economy
 F.CRNT: instantaneous fuel econ-
 A.TEMP: air temperature
 C.TEMP: coolant temperature
ECA10032
 Fuel meter
 FUELCON: amount of fuel con-
 TRIPTIME: running time
Operate the vehicle information display
as follows:
Rotate the wheel switch to move the
cursor over a display.
Push the wheel switch inward and the
selected display will highlight grey.
Rotate the wheel switch to choose a
different display item.
Push the wheel switch inward to con-
1
firm the new display item.
TIP
 ODO will lock at 999999 and can-
 TRIP1 and TRIP2 will reset to 0
5-9
omy
sumed
not be reset.
and begin counting again after
9999.9 has been reached.