Yamaha MT-09 Owner's Manual page 33

In this mode, the temperature levels
can be instantly adjusted by rotating
the wheel switch up/down.
To exit this mode and return the wheel
switch to its normal functionality, press
and hold the wheel switch inward.
TIP
The current grip warmer setting is
saved when the vehicle is turned off.
Lap timer
This stopwatch function can be acti-
vated through the setting MENU. (See
page 5-14.)
Once activated, the vehicle information
display is replaced with:
1
0 0 : 1 2 . 3 4
02
LAP
0 0 : 3 0 . 2 3
LATEST
1. Lap count
2. Current lap time
3. Latest/Previous lap time
To start the timer, press the pass
switch.
Each press of the pass switch will in-
crease the lap count by 1 and reset the
current lap timer.
To pause the lap timer, press the wheel
switch inward.
To unpause the timer, press the pass
switch and the timer will resume with-
out counting a new lap.
To exit the lap time mode, turn it off in
the settings MENU. (See page 5-14.)
TIP
 The engine must be running to
start the lap timer.
 The headlight will flash when the
pass switch is pressed.
 Whenever the lap timer is paused,
it can be resumed using the pass
switch.
Brake control icon "BC"
2
This icon is replaced by the auxiliary
3
system warning and coolant tempera-
ture warning indicators when they are
activated.
For more information on the BC sys-
tem see "BC" on page 4-4.
5-12
Instrument and control functions
Error mode warning "Err"
When an internal error occurs (e.g.,
communication with a system control-
ler has been cut off), the error mode
warning will appear as follows.
"Err" and "
an ECU error.
"Err" only indicates an ABS ECU error.
TIP
Depending on the nature of the error,
the display may not function properly
and TCS settings may be impossible to
change. Additionally, ABS may not
function properly. Use extra care when
braking and have a Yamaha dealer
check the vehicle immediately.
Auxiliary system warning "
This icon appears if a problem is de-
tected in a non-engine-related system.
Coolant temperature warning "
This icon appears if the coolant tem-
perature reaches 116 °C (241 °F) or
higher. Stop the vehicle and turn off the
engine. Allow the engine to cool.
" indicator light indicates
"
"
5