Exit - Cisco MGX 8850 Command Reference Manual

exit

exit
Exit from User Session
Use exit to exit the current user session and log out. To start another session, you must log in by using
telnet (for example).
Cards on Which This Command Runs
PXM45, AXSM
Syntax
exit
Related Commands
bye, logout
Attributes
Log: log
Example
Exit from the current user session.
MGX8850.8.PXM.a > exit
(session ended)
Cisco MGX 8850 Routing Switch Command Reference
1-18
State: active, standby, init
Chapter 1 Command Line Interface Overview
Privilege: ANYUSER
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001