Cisco Line Card 4500 E-Series Installation Manual page 35

Catalyst 4500 e-series switches
Table of Contents

Advertisement

Chapter 1
Product Overview
Table 1-7
Catalyst 4510R-E Switch Features (continued)
Feature
Fan tray
Power supply
OL-13972-02
Description
The chassis supports one hot-swappable fan tray. One fan tray model is
available:
WS-X4582-E (located on the fan tray front panel)
The Catalyst 4510R-E and the Catalyst 4510R+E switches use the
Note
same fan tray.
The fan tray contains ten individual fans. The individual fans are not
field replaceable; you must replace the fan tray in the event of a fan
failure.
Fan tray STATUS LED (located on the fan tray front panel)
Red—One or more individual fans have failed.
Green—Fan tray is operating normally.
Supports one or two power supplies. The following power supplies are
supported:
1000 W AC-input power supply (PWR-C45-1000AC)
1400 W AC-input power supply (PWR-C45-1400AC)
1300 W AC-input power supply (PWR-C45-1300ACV)
2800 W AC-input power supply (PWR-C45-2800ACV)
4200 W AC-input power supply (PWR-C45-4200ACV)
6000 W AC-input power supply (PWR-C45-6000ACV)
1400 W DC-input power supply, triple-input (PWR-C45-1400DC)
1400 W DC-input power supply with integrated PEM
(PWR-C45-1400DC-P)
External AC power shelf (WS-P4502-1PSU)
All Catalyst 4500 series AC-input power supplies require single-phase
source AC. Source AC can be out of phase between multiple power
supplies or multiple AC-power plugs on the same power supply because
all AC power supply inputs are isolated.
Single power supplies are installed in the left power supply bay. The
second power supply is installed in the right power supply bay.
For proper operation of the power supply OUTPUT FAIL LED,
Note
systems with single power supplies must be configured with a
minimum of one fan tray and one supervisor engine. Systems with
dual power supplies must have a minimum configuration of one fan
tray, one supervisor engine, and one additional module. Failure to
meet these minimum configuration requirements can cause a false
power supply output fail signal.
Catalyst 4500 E-Series Switches Installation Guide
Catalyst 4510R-E Switch
1-17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents