Cisco BPX 8600 Series Installation Manual page 5

Figure 2-4 Cabinets Joined at the Top
IPX IPX
cabinet 1 cabinet 2
Step 2 Insert the mounting bracket between the underside of the cabinet and the lock nut so that
the screw supporting the cabinet foot slides into the L shaped recess.
Rotate the mounting bracket towards the second cabinet so that the straight recess slides
Step 3
around the screw in the second cabinet (Figure 2-6).
Tighten the lock nuts to secure the mounting bracket in place (Figure 2-7).
Step 4
Perform this procedure for both the front and the rear of the cabinet.
Step 5
Figure 2-5 Bottom Mounting Bracket (IPX 16/32)
Bottom
mounting bracket
Insert second
Top mounting
bracket
IPX cabinet 1 IPX cabinet 2
Insert first
Multi-Cabinet Installations (IPX 16/32)
Securing
screw
Installation 2-5