Table of Contents
Advertisement
Qualified Personnel
Commissioning and operation of the equipment (module, device) described in this manual must be performed
by qualified personnel only. As used in the safety notes contained in this manual, qualified personnel are those
persons who are authorized to commission, release, ground and tag devices, systems, and electrical circuits
in accordance with safety standards.
Use as Prescribed
The equipment (device, module) must not be used for any other purposes than those described in the
Catalog and the Technical Description. If it is used together with third-party devices and components, these
must be recommended or approved by Siemens.
Correct and safe operation of the product requires adequate transportation, storage, installation, and
mounting as well as appropriate use and maintenance.
During the operation of electrical equipment, it is unavoidable that certain parts of this equipment will carry dan-
gerous voltages. Severe injury or damage to property can occur if the appropriate measures are not taken:
•
Before making any connections at all, ground the equipment at the PE terminal.
•
Hazardous voltages can be present on all switching components connected to the power supply.
•
Even after the supply voltage has been disconnected, hazardous voltages can still be present in the equip-
ment (capacitor storage).
•
Equipment with current transformer circuits must not be operated while open.
•
The limit values indicated in the manual or the operating instructions must not be exceeded; this also
refers to testing and commissioning
SIPROTEC Compact, Feeder Protection and Recloser Controller 7SC80, Bus Mapping/Point Lists
C53000-L2040-C353-3, Edition 09.2018
Preface
5
Advertisement
Table of Contents
