Event; Adding New Event; Maintaining Event - Honeywell Friedland GlobalGuard Operating Manual

reference.
Example:
Click and the following window will pop up.
This means that the selected Programme is used in
Schedule 01 [Demo].

2-6-2. Event

To create or maintain an Event, select [Setting] in the
Top Menu and click [Event] in the menu to the left. The
system supports up to a maximum of 32 Events and
once you have reached the cap, the [Add New Event]
button will turn grey.

2-6-2-1. Adding New Event

Click [Add New Event] when you wish to add a new
Event to the system. The system will bring up the
Setting – Event – New Event window for you to edit
relevant details. For more information on Event
maintenance, refer to section 2-6-2-2 on "Maintaining
Events" below.
2-6-2-2. Maintaining Events
To maintain an existing Event, simply click on the icon
of the desired Event to access the Event maintenance
screen. Please note that an Event must comprise a
detector/device trigger and Activate Actions
The following section will cover relevant Event
maintenance information:
Name: Event Name; you may create a name for the
selected Event for easy identification.
Number: Denotes the number of Events currently
available on the system; you can have up to a
maximum of 32 Events.
Step1: Specify trigger method (Device Triggered or
System Triggered)
1. Setting an Event to be Device Triggered:
(1) Device Trigger: You can specify the device
(i.e Zone Detector / Device / Keypad /
Remote that the system has learnt) to be
triggered and the type of action that will
trigger it.
(2) Specify the security mode for the trigger to
take effect. By default, the trigger will be
applied
configuration is only needed when you have
selected Device Trigger.
(3) Specify the valid time for the trigger. By
default, the trigger will be valid 24 hours
around the clock.
If the time for "from" is identical to the time
for "to", the trigger will remain active
throughout the day (i.e. 00:00 ~ 00:00)
If the time for "from" is greater than the time
for "to", the trigger will be active between the
changes of calendar days (i.e. 22:00 ~
08:00)
If the time for "from" is smaller than the time
for "to", the trigger will be active during the
specific time on a daily basis (i.e. 08:00 ~
22:00)
14
to all security modes. This