Cisco 850 Series Manual page 91

Cisco Interface Cards
Analog Voice Interface Cards
continued
Product Description
VIC2-2FXO FXO ports are used to
connect to PBX or key
Two-port FXO Voice/Fax
systems, or to provide
Interface Card (universal
off-premise connections
card for all countries) .
to PSTN or PTT . Supports
Also Supports CAMA
battery reversal detection
(Centralized Automated
and caller ID . These Cisco
Message Accounting) on
VICs can be software-
Any Port .
configured to work in all
countries . Also used to
connect to analog CAMA
trunk to provide dedicated
E-911 service (North
America only) .
Modular Router Solutions
Voice and Fax Integration
VIC2-4FXO FXO ports are used to
connect to PBX or key
Four-port FXO Voice/Fax
systems, or to provide
Interface Card (universal
off-premise connections
card for all countries) .
to PSTN or PTT . Supports
Also Supports CAMA
battery reversal detection
(Centralized Automated
and caller ID . These Cisco
Message Accounting) on
VICs can be software-
Any Port .
configured to work in all
countries . Also used to
connect to analog CAMA
trunk to provide dedicated
E-911 service (North
America only) .
Modular Router Solutions
Voice and Fax Integration
VIC2-2E/M
The two-port E&M voice
interface card for Cisco
Two-port E&M Voice/
voice/fax network modules
Fax Interface Card .
is used to connect to
Also Supports CAMA
PBX or key system trunk
(Centralized Automated
lines . This voice interface
Message Accounting)
card works with existing
on Any Port .
phone and fax equipment
to provide voice and fax
services over IP, and is
compatible with H . 3 23
standard for audio- and
videoconferencing .
Modular Router Solutions
Voice and Fax Integration
178
Supported Platforms
and Minimum Cisco
IOS Versions Comments
3800 Series–12 . 3 (11)T When used in a Cisco 2800
or 3800 router, requires a
2800 Series–12 . 3 (8)T4
DSP module .
12 . 3 Mainline and forward
supported in IP Voice
feature set .
3800 Series–12 . 3 (11)T When used in a Cisco 2800
or 3800 router, requires a
2800 Series–12 . 3 (8)T4
DSP module .
12 . 3 Mainline and forward
supported in IP Voice
feature set .
3800 Series–12 . 3 (11)T When used in a Cisco 2800
or 3800 router, requires a
2800 Series–12 . 3 (8)T4
DSP module .
12 . 3 Mainline and forward
supported in IP Voice
feature set .
Analog Voice Interface Cards
continued
Product Description
VIC-4FXS/DID FXS port is used to
connect directly to phones,
Four-port FXS Voice/Fax
fax machines, and key
Interface Card
systems . Generates
battery polarity reversal
and caller ID .
Modular Router Solutions
Voice and Fax Integration
ISDN BRI Voice Interface Cards
Product Description
VIC2-2BRI-NT/TE
This two-port ISDN
terminal-side or network-
Two-port BRI Voice/Fax
side Basic Rate Interface
Interface Card
(BRI) voice interface
card connects directly to
PSTNs and PBX/PABXs
and supports both on-
premise and off-premise
connections . Supports a
total of four voice channels
in a single interface card
via two RJ-45 physical
ports, and enables
toll-bypass and voice-over-
packet features .
Modular Router Solutions
Voice and Fax Integration
Cisco Interface Cards
Supported Platforms
and Minimum Cisco
IOS Versions Comments
3800 Series–12 . 3 (11)T When used in a Cisco 2800
or 3800 router, requires a
2800 Series–12 . 3 (8)T4
DSP module .
12 . 3 Mainline and forward
supported in IP Voice
feature set .
Supported Platforms
and Minimum Cisco
IOS Versions Comments
3800 Series–12 . 3 (11)T When used in a Cisco 2800
or 3800 router, requires a
2800 Series–12 . 3 (8)T4
DSP module .
12 . 3 Mainline and forward
supported in IP Voice
feature set .
179