Figure 2
Brackets for Telco Rack-Mounting
Attaching Brackets
Attach the mounting brackets to the chassis as shown in Figure 3, Figure 4, or Figure 5, using the screws provided in the bracket
kit. Use a number 2 Phillips screwdriver to install the bracket screws.
Figure 3
Bracket Attachment for 19-, 23-, or 24-Inch Rack with Front Panel Forward
DC STATUS
1
2
3
4
Note: The second bracket attaches to the other side of the chassis.
Figure 4
Bracket Attachment for 19-, 23-, or 24-Inch Rack with Rear Panel Forward
DC OUT PUT 2
DC OUT PUT 3
Note: The second bracket attaches to the other side of the chassis.
6
FAN
TEMP
DC OUT PUT 4