Figure 3-17 Dc Y Power Cable With Lugged Ends - Cisco Universal Broadband Router uBR10012 Hardware Installation Manual

Connecting the External AC-input Power Shelf to the Cisco uBR10012 Router
Figure 3-17
1 Lugged end of DC Y power cable that
connects to Lineage power shelves
2 Lugged end of DC Y power cable that
connects to the DC terminal blocks on the
UBR-PWR-DC-PLUS= modules.
Only the left DC power terminals of the two Lineage shelves are used with UBR-PWR-DC-PLUS=
Caution
modules on the Cisco uBR10012 router. Ensure that the right DC power terminals on the Lineage shelves
are covered with the provided plastic covers.
Attach the alarm monitor cables to the two Lineage power shelves, see
f.
Monitor Cable" section on page
Note
Connect the un-energized AC power cables to the power shelf.
g.
Do not connect the AC power cables to the facility power sources until the DC power cables and the
Caution
alarm monitor cables are connected to the power shelf, and to the Cisco uBR10012 router.
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
3-28
DC Y Power Cable with Lugged Ends
1
Only one cable of alarm monitor cable is connected to each Lineage power shelf. The other end
of the cable is unused. (See
3 Lugged end of DC Y power cable that
connects to the DC terminal blocks on the
UBR-PWR-DC-PLUS= modules.
—
3-31.
Figure 3-18.)
Chapter 3 Installing the Cisco uBR10012 Router
2
3
"Connecting the Alarm
OL-18259-09