Cisco UBR10012 Quick Start Manual page 12

Overview
Figure 6
Two AC power receptacles—These connect to the facility power source.
•
AC PEM enable power switch—This powers on the AC PEM module.
•
AC power cord clips—These help to secure the AC power cables.
•
Two handles—These help during the removal and installation of the AC PEM module in the Cisco
•
uBR10012 chassis.
Figure 6
2
3
1 AC power receptacles
2
AC PEM enable power switch
3 AC power cord clips
Four LEDs (V1 POWER, V2 POWER, POWER, and FAULT) indicate the status of the AC PEM module.
In addition, there is a PRODUCT ID LED/switch on the front panel of the AC PEM module.
Cisco uBR10012 Series Universal Broadband Router–Quick Start Guide
12
shows the faceplate of the AC PEM module, which has:
AC PEM Module (UBR10-PWR-AC-PLUS=)
ENABLE
200-240V ~ , 13A, 50/60Hz
V1 POWER
V2 POWER
POWER
FAULT
PRODUCT ID
SAFETY WARNING LABEL
UBR10K-PWR-AC-PLUS
1
4
5
3
4
4 Handles on the AC PEM
5
PRODUCT ID LED/switch
—
OL-24972-01