Table of Contents
Advertisement
17 ENGINE
-
Check stop disks @ for damage and wear.
-
Use new lock rings @ with every repair.
-
Check distance sleeves Ci) for damage and wear.
17.4.42
Preparatory work
-
Lubricate all parts carefully before assembling.
-
Check the transmission.
Main work
-
Secure the main shaft in the vise with the gear teeth facing downward.
I
Guideline
Use soft jaws.
-
Mount needle bearing
-
Mount stop disk
-
Mount third/fourth-gear sliding gear
-
Mount distance sleeve (D.
-
Mount lock ring
-
Mount second-gear fixed gear @ with the collar facing downward and mount stop disk
-
Finally, check all the gear wheels for smooth operation.
216
there is damage or wear:
If
-
Change the stop disks.
there is damage or wear:
If
-
Change the distance sleeves.
Assembling the main shaft
Info
Use new lock rings with every repair.
(!ill
p. 214)
O,
and mount fifth-gear idler gear
(D
and lock ring
@.
8
with the shift dogs facing up.
C,.
0
with the small gear wheel facing downward.
310084-10
0.
..
..
Advertisement
Table of Contents
