Cisco 12016 Unpacking Instructions Manual page 13

b.
c.
Figure 7
d.
Note
78-16081-02
Remove the blocking plates from the two front hold-down brackets.
Remove the bolts that fasten the two hold-down brackets to the front side of
the scissor-jack platform
Removing Hold-Down Bracket Bolts from the Scissor-Jack
Platform
Set the hold-down brackets, blocking plates, and bolts safely aside.
You must reinstall the empty scissor-jack platform on the pallet before
storing it with the remainder of the shipping container so that you can use
it later to remove the router from the equipment rack and repackage the
router in the event it must be shipped to another site or—if
necessary—returned to the factory.
Cisco 12016, Cisco 12416, and Cisco 12816 Router Unpacking Instructions
(Figure 7).
Unpacking the Router
13