Cisco 7513 Quick Start Manual page 10

Install the Hardware
Mount the Chassis in the Rack
8
Caution
perform this step.
Step 1
With a person positioned at either side of
the chassis, grasp the bottom edge of the
chassis with one hand near the front and
the other near the back.
Step 2
Slowly lift the chassis in unison. Avoid
sudden twists or moves to prevent injury.
Step 3
With the chassis positioned so the front is
closest to the rack, insert the front of the
chassis into the rack between the brackets,
and then slowly lower the chassis until it
rests on the two bracket ledges.
POWER
A
Two people are required to
POWER
B
Step 4
Slide the chassis back into the rack along
the ledges until the ears meet the front
mounting posts on both sides of the rack.
Step 5
Secure each ear to the rack-mounting post
with two 10-32 x 5/8-inch LG Phillips
pan-head screws.