Site Preparation And Safety Information - Cisco 7200 Series Regulatory Compliance And Safety Information Manual

Site Preparation and Safety Information

Only trained and qualified service personnel (as defined in IEC 60950 and AS/NZS 3260) should install,
Note
replace, or service the equipment. Install the system in accordance with the U.S. National Electric Code
if you are in the United States.
The instructions in this guide warn you about situations that could cause bodily injury. Before
Warning
working on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents.
Preparing Your Site for Installation
To ensure normal system operation, plan your site configuration and prepare your site before installation.
Choosing a Site for Installation
•
•
•
Ensuring Overcurrent Protection
The system relies on the protective devices in the building installation for protection against
short-circuit, overcurrent, and earth (grounding) fault. Ensure that the protective devices in the building
installation are properly rated to protect the system, and that they comply with national and local codes.
Grounding the System
•
•
•
Creating a Safe Environment
•
•
•
78-3419-19
Install the system in a restricted access area, where access can be gained only by service personnel
through the use of a special tool, lock and key, or other means of security.
Choose a site with a dry, clean, well-ventilated and air-conditioned area.
Choose a site that maintains an ambient temperature of 32 to 104
Do not defeat the ground conductor on an AC plug.
Connect AC-powered systems to grounded power outlets.
Connect the system to earth (ground).
Keep tools and chassis components off the floor and away from foot traffic.
Clear the area of possible hazards, such as moist floors, ungrounded power extension cables, and
missing safety grounds.
Keep the area around the chassis free from dust and foreign conductive material (such as metal
flakes from nearby construction activity).
Regulatory Compliance and Safety Information for Cisco 7200 Series Routers
Site Preparation and Safety Information
o o
F (0 to 40 C).
67