Cisco 700 Series Quick Start Manual page 4

Connect the ISDN Line
This section shows how to connect the router to the ISDN.
Connect a Cisco 762 or Cisco 776 Router to the ISDN Line
Connect the red ISDN U cable to the red port labeled ISDN U on the rear panel of your router.
Step 1
CO NF IG
Connect the other end of the ISDN U cable directly to an RJ-45 ISDN wall jack.
Step 2
If necessary, use the enclosed RJ-45-to-RJ-11 adapter to connect to an RJ-11 ISDN wall
Note
jack.
Connect a Cisco 761 or Cisco 775 Router to the ISDN Line
Step 1 Outside North America, connect the orange ISDN S/T cable to the orange ISDN S/T port on the rear
panel of your router. Inside North America, see the Cisco 700 Series Router Installation Guide for
instructions.
CO NFI G
4
10B AS ET
CIS CO 776
NO DE
HU B IS DN S/
T
ISD N U
+5V ---1 .5A
-30 V--- 0.2A
S
0
NT -1
10B ASE
T
CIS CO 776
NO DE
ISD N S/T
HU B
+5V ---1. 5A
+/-5%
-30V --- 0.2A
+/-25 %
S
0
+/-5 %
+/-2 5%
78-10157-01