Table of Contents
Advertisement
Product Description
Product Description
Prerequisites and Preparation
Cisco 10005 ESR AC Power Supply Installation
2
The AC power supply
facility AC input power (100 to 240 VAC nominal) to the –48V VDC used
internally by the system. Power is delivered to the power supply by the AC power
cord. The AC power supply is provided with an IEC 320/C20 AC inlet, rated
16A/250V (20A in North America).
Figure 1
AC Power Supply
CA UT ION
CA UT ION
TH IS UN
SU PP LY
IT HA S
MO RE
CO RD .
PO WE
TH AN
DIS CO
ON E PO
R SU PP
NN EC T
SE RV ICI
LY CO RD
WE R
TW O (2)
NG TO
S BE FO
AV OID
RE
EL EC TR
IC SH OC
K.
The Cisco 10005 chassis has two compartments for power supplies. The chassis
can operate with a single power supply; install two power supplies if you need
power redundancy.
Before you perform any of the procedures in this guide, we recommend that you:
Read the safety guidelines in the next section and review the electrical safety
•
and ESD-prevention guidelines in the Cisco 10005 ESR Hardware
Installation Guide.
Ensure that you have all of the necessary tools and equipment (see the
•
"Required Tools and Equipment" section on page
(Figure
1) provides power conversion directly from the
6).
78-12652-01
Advertisement
Table of Contents
