Overloading; Avoid Collisions; Collisions With Floating Or Submerged Objects - Yamaha F8F Owner's Manual

erly, alert your passengers if you must make
any unusual maneuver. Always avoid jump-
ing waves or wakes.
EMU33763

Overloading

Do not overload the boat. Consult the boat
capacity plate or boat manufacturer for max-
imum weight and number of passengers. Be
sure that weight is properly distributed ac-
cording to the boat manufacturer's instruc-
tions. Overloading
distribution can compromise the boat's han-
dling and lead to an accident, capsizing or
swamping.
EMU33773

Avoid collisions

Scan constantly for people, objects, and oth-
er boats. Be alert for conditions that limit your
visibility or block your vision of others.
Operate defensively at safe speeds and keep
a safe distance away from people, objects,
and other boats.
 Do not follow directly behind other boats or
waterskiers.
 Avoid sharp turns or other maneuvers that
make it hard for others to avoid you or un-
derstand where you are going.
 Avoid areas with submerged objects or
shallow water.
or incorrect weight
ZMU06025
Safety information
 Ride within your limits and avoid aggres-
sive maneuvers to reduce the risk of loss of
control, ejection, and collision.
 Take early action to avoid collisions. Re-
member, boats do not have brakes, and
stopping the engine or reducing throttle
can reduce the ability to steer. If you are not
sure that you can stop in time before hitting
an obstacle, apply throttle and turn in an-
other direction.
EMU48100
Collisions with floating or submerged
objects
If the outboard motor hits a floating object or
an obstacle in the water while cruising, the
following could occur:
 The passengers and any loose equipment
or luggage could be thrown forward due to
the sudden deceleration.
 Parts of the outboard motor could come
loose as a result of the impact and could be
thrown into the boat.
 The boat or outboard motor could be dam-
aged as a result of the impact.
When you operate the boat in an area where
there might be floating objects or obstacles in
the water, be sure to adjust the trim angle of
the outboard motor, slow down, and operate
carefully. For further information, see page
55.
If the outboard motor hits a floating object or
an obstacle in the water, make sure that there
are no abnormalities with the boat and the
outboard motor. If anything abnormal is
found, return to the nearest harbor at low
speed and have a Yamaha dealer inspect the
outboard motor.
3