Table of Contents
Advertisement
Chapter 5
CLI Commands
dspmgcs
To display configuration data about all configured call agents—Media Gateway Control (MGC)
protocols—use the dspmgcs command in the VoIP switching/trunking and switched AAL2 PVC
operating modes.
Syntax Description
This command has no arguments or keywords.
Command Modes
VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines
Follow standard CLI procedures for this command.
Examples
The following example shows that the configuration data about the currently configured call agents is
displayed:
dspmgcs
mgcNumber
--------
1
Related Commands
Command
delmgc
dspmaxmgcs
dspmgc
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
dspmgcs
mgcName
--------
mgc1
Description
Deletes a call agent from a VISM card.
Displays the maximum number of MGCs that can be configured on the current card.
Displays the configuration data of a specified configured call agent.
Cisco VISM Installation and Configuration Guide
dspmgcs
5-385
Advertisement
Table of Contents
