Table of Contents
Advertisement
Chapter 5
CLI Commands
clrmngcidcnt
To clear AAL2 channel identifier (CID) counters, use the clrmngcidcnt command in the switched AAL2
PVC and AAL2 trunking operating modes.
Syntax Description
endpt-num
Command Modes
Switched AAL2 PVC and AAL2 trunking
Usage Guidelines
Indicate the endpoint number you want to clear AAL2 counters for with the endpt-num argument value.
Examples
The following example shows that the AAL2 counters for endpoint number 140 are cleared:
clrmngcidcnt 140
Related Commands
Command
dspcid
dspcids
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
clrmngcidcnt endpt-num
The endpoint number for which the AAL2 counters are cleared. It can be a value from
one of the following ranges:
•
For template number 1:
For VISM, from 1 to 145
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
–
•
For template number 2:
–
For VISM T1, from 1 to 192
–
For VISM E1, from 1 to 248
•
For template number 3:
For VISM, from 1 to 120
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
–
For template number 4:
•
For VISM-PR, from 1 to 144
–
Description
Displays a VISM card's AAL2 channel identifier.
Displays a VISM card's AAL2 channel identifiers for a specified LCN.
Cisco VISM Installation and Configuration Guide
clrmngcidcnt
5-57
Advertisement
Table of Contents
