Table of Contents
Advertisement
Quick Links
Installing the NM-CUE 256-MB SDRAM DIMM
Memory Card
Product Number: MEMCUE-256D=
This document describes how to install a 256-MB SDRAM DIMM memory card in the NM-CUE
network module .
This document is intended for the network module installer, who should be familiar with electronic
circuitry and wiring practices and have experience as an electronic or electromechanical technician. Use
this document in conjunction with the Regulatory Compliance and Safety Information document for your
router.
For complete installation instructions for network module installation in Cisco 2600 series, Cisco 3600
Note
series, and Cisco 3700 series routers, see the online document Installing Advanced Integration Modules
in Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Routers at the following URL:
http://www.cisco.com/en/US/docs/routers/access/2600/hardware/module/installation/guide/aims_ins.ht
ml
Note
For complete installation instructions for network module installation in Cisco 2800 series integrated
services routers, see the online document Installing and Upgrading Internal Modules in Cisco 2800
Series Routers at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/2800/hw/10_hw.htm#wp1028352
For complete installation instructions for network module installation in Cisco 3800 Series Integrated
Note
Services Routers, see the online document Installing and Upgrading Internal Components in Cisco 3800
Series Routers at the following URL:
http://cisco.com/en/US/docs/routers/access/3800/hardware/installation/guide/hw.html
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Copyright © 2005 Cisco Systems, Inc. All rights reserved.
Advertisement
Table of Contents
Related Manuals for Cisco Memory Card MEMCUE-256D=
Summary of Contents for Cisco Memory Card MEMCUE-256D=
- Page 1 Services Routers, see the online document Installing and Upgrading Internal Components in Cisco 3800 Series Routers at the following URL: http://cisco.com/en/US/docs/routers/access/3800/hardware/installation/guide/hw.html Corporate Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Copyright © 2005 Cisco Systems, Inc. All rights reserved.
- Page 2 Installing a 256-MB SDRAM DIMM Memory Card in the NM-CUE Network Module NM-CUE network modules have 256 MB of SDRAM installed on the system board. You can install an additional SDRAM DIMM in the SDRAM DIMM connector to expand system memory to a maximum of 512 MB.
- Page 3 Figure 1 NM-CUE System Board with Daughter Card Daughter card screws Daughter card Step 2 Locate the existing 256-MB SDRAM DIMM memory card socket on the NM-CUE. (See Make sure that both latches on the SDRAM DIMM connector are in the open position. Step 3 Orient the SDRAM DIMM so that the polarization notch lines up with the polarization key on the Step 4...
- Page 4 Figure 2 SDRAM DIMM Showing Polarization Notch Step 5 Carefully and firmly press the 256-MB SDRAM DIMM into the connector until the latches close onto the SDRAM DIMM. Make sure that both latches rotate to the closed position against the SDRAM DIMM.
-
Page 5: Obtaining Documentation
Figure 4 Connector Pins E - B D I S L I N s t E t h e r n e Obtaining Documentation For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed... -
Page 6: Reporting Security Problems In Cisco Products
Reporting Security Problems in Cisco Products Cisco is committed to delivering secure products. We test our products internally before we release them, and we strive to correct all vulnerabilities quickly. If you think that you might have identified a vulnerability in a Cisco product, contact PSIRT: Emergencies —... -
Page 7: Submitting A Service Request
or model name; by tree view; or for certain products, by copying and pasting show command output. Search results show an illustration of your product with the serial number label location highlighted. Locate the serial number label on your product and record the information before placing a service call. Submitting a Service Request Using the online TAC Service Request Tool is the fastest way to open S3 and S4 service requests. -
Page 8: Obtaining Additional Publications And Information
CCVP, the Cisco logo, and Welcome to the Human Network are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is a service mark of Cisco Systems, Inc.; and Access Registrar, Aironet, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, Cisco, the Cisco...