Ip Dhcp Pool - Cisco 32369 Manual

ip dhcp pool

To configure a Dynamic Host Configuration Protocol (DHCP) address pool on a Cisco IOS DHCP
Server and enter DHCP pool configuration mode, use the ip dhcp pool global configuration
command. Use the no form of this command to remove the address pool.
ip dhcp pool name
no ip dhcp pool name
Syntax Description
name
Defaults
DHCP address pools are not configured.
Command Modes
Global configuration
Usage Guidelines
This command first appeared in Cisco IOS Release 12.0(1)T.
During execution, the configuration mode changes to DHCP pool configuration mode, identified by
the (config-dhcp)# prompt. In this mode, the administrator can configure pool parameters, like the
IP subnet number and default router list.
Examples
The following example configures pool1 as the DHCP address pool:
ip dhcp pool pool1
Related Commands
host
ip dhcp excluded-address
network (DHCP)
Can either be a symbolic string (such as "engineering") or an integer
(such as 0).
ip dhcp pool
Cisco IOS DHCP Server 31