Connecting A Personal Computer; When Ethernet Cable Is Used (Direct Connection) - Mitsubishi Electric MELSEC iQ-F Series User Manual

14.6

Connecting a Personal Computer

Connect a personal computer that has an engineering tool installed to the CPU module.

When Ethernet cable is used (direct connection)

Connect a personal computer directly to the CPU module, following the procedure below.
GX Works3 settings
No. Item
1) Personal computer side I/F
2) programmable controller
side I/F
Other Station Setting
For the FX5 CPU module, the Ethernet adapter on the personal computer side used for the Ethernet port
direct connection can be specified.
Select an adapter on the "Connection Destination Simple Setting Connection" window.
Selection item
Ethernet Board
CPU module
No Specification
1.
Connect a personal computer to the CPU module using
the Ethernet cable.
2.
Select [Online]  [Current Connection Destination] on
the menubar of the engineering tool.
3.
Select [Ethernet] as the direct connection method with
the CPU module on the "Connection Destination Simple
Setting Connection" window.
Click the "Communication Test" button to check if the
connection can be established with the CPU module.
Internal setting

Check at Communication Time
Retry Times
14 PROCEDURES BEFORE OPERATION
14.6 Connecting a Personal Computer
Input value

Ethernet Port Direct Connection
30 seconds
0 times
239
14