Extension Connector Type - Mitsubishi Electric MELSEC iQ-F Series User Manual

Extension connector type

Item Specifications
FX5-C16EYR/D-
TS
Current 5VDC 100mA
consumption
24VDC 100mA
Mass (weight) Approx. 0.2kg
External color Munsell 0.6B7.6/0.2
■Output specifications
Number of output points 16 points
Connection type Spring clamp
terminal block
Output type Relay
External power supply 30VDC or less
240VAC or less
Indication of output LED turns on when output is on.
operation With FX5-C32EYT/D, the lower number/higher number order is switched with the DISP switch F/L.
Max. load 2A/point
The total load
current of resistance
loads per common
terminal should be
the following value.
• 8 output points/
common terminal:
4A or less
Open circuit leakage 
current
Min. load 5VDC, 2mA
(reference values)
Off  On
Response Approx. 10ms
time
On  Off
Approx. 10ms
Voltage drop when ON 
*1 250VAC or less when the module does not comply with CE, UL, cUL standards
*2 When two common terminals are connected outside the I/O module, resistance load is 8A or less.
FX5- FX5-
C16EYT/D C32EYT/D
100mA 120mA
100mA 200mA
Approx. 0.1kg Approx. 0.15kg
16 points 32 points
Connector
Transistor/sink output
5-30VDC
*1
0.1A/point
The total load current of resistance loads per common terminal should be the following value.
• 8 output points/common terminal: 0.8A or less
*2
0.1mA/30VDC

0.2ms or less/100mA (at 24VDC)
0.2ms or less/100mA (at 24VDC)
1.5V or less
FX5- FX5- FX5-
C32EYT/D- C16EYT/ C32EYT/
TS DSS DSS
120mA 100mA 120mA
200mA 100mA 200mA
Approx. 0.15kg Approx. 0.1kg Approx. 0.15kg
16 points 32 points
Spring clamp Connector
terminal block
Transistor/source output
6 I/O MODULE PERFORMANCE SPECIFICATIONS
FX5-
C32EYT/
DSS-TS
120mA
200mA
Approx. 0.15kg
Spring clamp
terminal block
121
6.2 Output Module
6