Stopping Call Forwarding; Setting Do Not Disturb; Activating Do Not Disturb - Cisco 509G User Manual

Using Basic Phone Functions

Setting Do Not Disturb

STEP 3
STEP 4

Setting Do Not Disturb

NOTE
Cisco Small Business Pro IP Phone SPA 50X User Guide (SIP)
Press ok.
Press save.

Stopping Call Forwarding

To stop forwarding calls, press the -cfwd softkey.
You can also stop call forwarding by pressing the Setup button and selecting Call
Forward > edit. Press clear, then press ok. Press save.
Using star codes:
• Enter *73 to deactivate call forwarding.
• Enter *91 to deactivate call forward busy.
• Enter *93 to deactivate call forward no answer.
Use the Do Not Disturb feature to prevent incoming calls from ringing your phone.
If you have voice mail configured, incoming callers immediately reach voice mail. If
voice mail is not configured, callers hear a busy signal or message.
You can also set Do Not Disturb from your PC using the IP Phone Web Interface;
see the "Setting Do Not Disturb" section on page
For the Cisco SPA 501G, you can only set Do Not Disturb in the IP Phone Web
Interface or by using the star code.

Activating Do Not Disturb

Using the dnd softkey:
To activate Do Not Disturb, press the dnd softkey. The LCD screen indicates that
Do Not Disturb is turned on for your phone.
69.
3
38