Advertisement
Quick Links
H-2450
GARMENT STORAGE
CENTER WITH BASKETS
Connector x 6
Shelf Support (60 Sets)
Self-leveler x 8
Tall Post Top x 6
Tall Post Bottom x 6
PAGE 1 OF 4
PARTS
18 x 18" Shelf x 6
18 x 18" Frame x 2
Basket Support Bar (6 Sets)
Short Post x 2
36 x 18" Shelf x 1
Garment Rod x 1
Garment Rod Hanger x 2
Pin x 12
Basket x 6
0313 IH-2450
Advertisement
Related Manuals for U-Line H-2450
Summary of Contents for U-Line H-2450
- Page 1 H-2450 GARMENT STORAGE CENTER WITH BASKETS PARTS 36 x 18" Shelf x 1 Connector x 6 18 x 18" Shelf x 6 Garment Rod x 1 Shelf Support (60 Sets) 18 x 18" Frame x 2 Self-leveler x 8 Garment Rod Hanger x 2...
- Page 2 ASSEMBLY POST ASSEMBLY 3. Take the other four tall posts, snap shelf supports into the very bottom groove on all four posts. Slide posts 1. Connect tall post tops and tall post bottoms to each through underside of square frame until it slides other by screwing them together.
- Page 3 ASSEMBLY CONTINUED UNIT ASSEMBLY CONTINUED 10. Snap eight sets of shelf supports directly above the last set of basket support bars. 6. Snap four sets of shelf supports onto the outer 11. Slide two square shelves onto the posts until shelves posts with five grooves visible.
- Page 4 ASSEMBLY CONTINUED RIGHT SIDE OF THE UNIT 19. Hook the short end of garment rod hangers onto the center wire of the shelf. (See Figure 17) 15. Snap four sets of shelf supports at the top of the two inner tall posts and two outer posts. (See Figure 14) Figure 17 16.