Chapter 2
Installation
Table 2-1
Device
1000BASE-X module (for modular
2900 XL switches)
3500 XL switches
2950 switches
3550 multilayer switches
Note
The GigaStack GBIC supports setting a trunk to IEEE 802.1Q or Inter-Switch
Link (ISL) encapsulation. All GigaStack GBIC interfaces in the cascaded stack
should be configured as trunk interfaces (switchport mode trunk interface
configuration command) and to use the same encapsulation method (switchport
trunk encapsulation {isl | dot1q} interface configuration command). For more
information on these commands, refer to the command reference for your switch.
For more information, see the
the
Connections with a Redundant Link" section on page
78-6460-04
Available GBIC Ports in a Point-to-Point Configuration
"Cascaded Stack Connections" section on page
Catalyst GigaStack Gigabit Interface Converter Hardware Installation Guide
Available GigaStack
GBIC Ports
2
2
2
2
"Point-to-Point Connections" section on page
2-11, and the
Creating Connections
2-10,
"Cascaded Stack
2-12.
2-9