Gigastack Gbic Leds - Cisco GigaStack WS-X3500-XL Hardware Installation Manual

GigaStack GBIC LEDs

GigaStack GBIC LEDs
Catalyst GigaStack Gigabit Interface Converter Hardware Installation Guide
1-2
• Support for redundant loop configurations in a GigaStack GBIC stack
For more information, see the
Configurations" section on page 1-7
with a Redundant Link" section on page 2-12
• Support for IOS Release 12.0(5)XU or later for Catalyst 2900 XL and
3500 XL switches, support for Release 12.1(6)EA2 or later for Catalyst 2950
switches, and support for Release 12.1(4)EA1 or later for Catalyst 3550
multilayer switches
• Management through the Cisco IOS command-line interface (CLI) or the
web-based Cluster Management Suite (CMS)
• Field-replaceable
Figure 1-1 shows the LED locations on the GigaStack GBIC, and
describes the LED colors and their meanings.
Figure 1-1 GigaStack GBIC LEDs and Ports
LEDs
1
2
Two GigaStack GBIC
ports
"Minimum IOS Release for Redundant Loop
and the "Cascaded Stack Connections
Chapter 1 Overview
Table 1-1
78-6460-04