Download Print this page

Honeywell DT92E Quick Start Manual page 2

Wireless digital thermostat
Hide thumbs Also See for DT92E:

Advertisement

WIRELESS DIGIT L THERMOST T
Installation
The DT92E thermostat must be
located where it is not subjected to
extraneous heat gains, direct sunlight
or draughts.
Ordering Specification
DT92E1000
Wireless digital room thermostat with
ECO energy saving feature; complete
with batteries and full instructions
TG510A1001
Lockable clear plastic thermostat
cover, includes backplate and spare
keys
Wiring
Dimensions (mm)
DT92 Wireless Thermostat
90
© Honeywell Control Products and Systems
Specification
Receiver Switch Rating (BDR91): 5 resistive 3 inductive
Switch Type (BDR91)
Power Supply (DT92)
Power Supply (BDR91)
Temperature Setting Range
OFF Setpoint Temperature
ECO Setpoint Temperature
Temperature Control ccuracy : ± 0.5K at 20˚C (50% load, 3K/hr)
Operating Temperature Range : 0 to 40˚C
Operating Humidity Range
Storage Conditions
IP Rating
RF Operation Band
RF Communication Range
RF Communication Technology : Two way short, high rate transmissions to
RF Blocking Immunity
Standards
EC Directive
The DT92 and receiver are radio frequency devices and for best performance
should be installed in clear spaces. Leave at least 30cm distance from any
metal objects including wall boxes and at least 1m from any other electrical
equipment. Do not mount receiver on metal wall boxes.
BDR91 Receiver
29
27
: 24V~ to 230V~, 50Hz
: Single pole, double throw (SPDT)
: Two
size, 1.5V alkaline batteries
: 230V C (+10 -15%), 50Hz
: 5 to 35°C in 0.5°C steps
can be limited between 5 and 35°C
: 5°C (default) can be set between
5 & 16°C or turned off
: 18°C (default) can be set between
5 & 35°C (in 1°C steps)
: 10 to 90% rh, non-condensing
: –20 to 55˚C
: 10 to 90% rh, non-condensing
: IP30
: ISM (868.0 - 868.6) Mhz, 1% duty cycle
: <30m in residential building
minimise air time/ avoid interference
: Receiver Class 2
: CE marked
: Conforms to protection requirements of
EN60730-1 (2001), EN60730-2-9 (2002),
EN55014-1 (2006), EN55014-2 (1997),
ETSI EN300 220-3, ETSI EN301 489-3
: WEEE & RoSH compliant
90
DT92E
30.5
31.6

Advertisement

loading