For The Customer In Canada - Hitachi CMP205SXE Service Manual

n n Display stand
The monitor can swivel though 45 degrees both clockwise and counter-clockwise and adjusts 3 degrees in
downward and 8degrees in upward directions.
All adjustments should be done using both hands.
(To tilt towards the front, push the bottom of the monitor.)
! WARNING §
§
n n FCC (Federal Communications Commission) STATEMENT WARNING
WARNING: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
INSTRUCTIONS TO USERS: This equipment complies with the requirements of FCC (Federal
Communication Commission) equipment's provided that following conditions are met.
Power cord: The provided grounded power supply cord must be used.
Signal cable: The provided shielded signal cable with bonded ferrite core must be used.
CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could
:
void the user's authority to operate this equipment.

FOR THE CUSTOMER IN CANADA

NOTICE : This Class A digital apparatus complies with ICES-003.
Be careful not to allow your hand to become caught
between the monitor and display stand.
Do not remove the display from the display stand. (The
display stand is fixed in place with hooks and screws.)
Using a display with the hooks or screws out of place
may cause the PDP monitor to fall, thus resulting in
bodily injury or damage to nearby computer equipment.
8