Working On Rooms And Room Groups - Honeywell Smile Operating Instructions Manual

Menu Settings

10.3 Working on Rooms and Room Groups

EN2H-0402GE51 R0316
In the "Rooms" area, you can
• change the names of the rooms
• assign or change pictures of the rooms
• assign rooms to particular users
• establish and change room groups
1. In the menu bar, tap on the Rooms icon. On the right side, all rooms or heating
circuits (as the case may be) will appear.
Figure 7: The "Rooms" area
Note
The available rooms are created during startup by the expert. Within this
procedure, the names of the rooms are also defined.
The "Rooms" area is available only to users with the "Expert" or "Owner" user role.
During the first use, all rooms appear in this view. No room groups are yet created (for the
creation of room groups, see chapter "Creating Room Groups" on page 32).
• With a simple tap on the rooms, you can select one to be able to work on it.
• Small icons below the room pictures show the respective status of a room.
28