Operation; End Devices, Operating Systems, And User Interfaces; Start Smile App - Honeywell Smile Operating Instructions Manual

Operation

5 Operation
5.1

End Devices, Operating Systems, and User Interfaces

6

Start Smile App

EN2H-0402GE51 R0316
System architecture
The Smile App provides the room and hot water (WW) set point. Based on these set
points, the Smile Connect calculates the flow or WW set point and transmits the values to
the controller. Each room group / each heating circuit must be configured using the Smile
Connect.
Effects on the controller's operation
• The Eco, Party, and Holiday quick actions, etc., are possible only via App.
• After selecting quick actions via the Smile App, the time program is overwritten.
• The set point pre-settings of the SDC controller are only for emergency operation
without Smile Connect.
• The Info button is available.
• Emission test function and manual operation function is available.
The Smile App can be used on Tablet and Smartphone devices with Android or IOs
operation system. In these Operating Instructions, operation with a Tablet with Android
operation system is described. The operation of Smartphones with Android operation
system and IOs devices are very similar. For information about general operation, please
use the help system and the Smile App help of the corresponding device.
1. Tap on the icon in your Tablet's operating interface.
The Start screen of the Smile App will appear.
Figure 2: Start screen of the Smile App
10