Operating Modes And Quick Actions; Operating Modes Of The Time Program; Actions - Honeywell Smile Operating Instructions Manual

9

Operating Modes and Quick Actions

9.1

Operating Modes of the Time Program

9.2

Actions

4. Stop wiping as soon as you have adjusted the desired temperature.
After a few seconds, the display in the room picture vanishes and the updated
temperature will appear below the room picture.
Comfort and Desired Temperature
The time program controls the heating and setback operation automatically. In this case,
the pre-adjusted comfort temperatures Comfort Hi, Comfort Lo, and Night are used.
By using the temperature scroll field, the active comfort temperature can be changed and
a desired temperature can be selected. The adjusted comfort temperature is valid until
the end of the cycle time point, but is at least still 3 hours active.
It is not possible to extend the actual cycle time heating by setting an earlier comfort
temperature. Rather, the extension can be pre-adjusted only using the "Party" action.
During the heating phase, a premature change into the setback phase is possible
(ecological).
During the setback phase, a premature change into the heating phase is possible.
The active quick action will show up as an icon in the room picture on the Home screen.
Icon Action
Automatic operation Heating (Comfort Hi, Comfort Lo)
Automatic operation Setback
Desired temperature manually adjustable
Icon of action Respective quick action
By using quick actions, the time schedules and temperatures can be suspended for an
adjustable time span and can then be controlled according to the specific quick action
setting.
Operating Modes and Quick Actions
17 EN2H-0402GE51 R0316