Using A Pedal; Damper Pedal Jack - Casio PX-S3100BK User Manual

Using a Pedal

Your Digital Piano has three jacks for connection of pedals.
Jack Connectable Pedal
cr DAMPER Switch type pedal*
PEDAL
cs PEDAL UNIT Separately available SP-34 pedal unit
(three pedals: damper, soft, and
sostenuto).
dl EXPRESSION/ Switch type pedal,*
ASSIGNABLE pedal*
*1 Included pedal (SP-3) or separately available CASIO
sustain pedal.
*2 See "To specify the pedal
• Pedals connected to the cr DAMPER PEDAL jack,
dl EXPRESSION/ASSIGNABLE jack, and cs PEDAL
UNIT jack can be used simultaneously.
• You can also use a pedal to switch the Digital Piano
registration setup. For details, see
Through Multiple Setups (Sequential Pedal
EN-42).

DAMPER PEDAL Jack

Connect the supplied pedal (SP-3) to the cr DAMPER
PEDAL jack.
Back
cr DAMPER PEDAL jack (Standard jack (6.3mm))
1
1 expression
2
type" (page EN-9).
"Using a Pedal to Cycle
Recall)" (page
SP-3
■ To change the function of the pedal connected to
the DAMPER PEDAL jack
You can use FUNCTION parameter
select one of the settings below.
This setting
Does this:
(displayed):
Sustain Sustains notes played while the pedal is
depressed, even if the keyboard key is
subsequently released. Organ and
other tones that are sustained as long
as keyboard key are depressed
continue to sound as long as the pedal
is depressed.
Sostenuto Sustains only the notes of the keys that
are depressed when the pedal is
pressed until the pedal is released,
even if the keyboard keys are released
first.
Soft Slightly lowers and softens notes played
while the pedal is depressed.
Arpeggio Hold When the arpeggiator (page EN-27) is
enabled, arpeggiator hold can be
enabled or disabled when the pedal is
depressed.
Play/Stop Performs the same operations as the
8a button.
Fill-in Plays a fill-in when the pedal is
depressed while an Auto
Accompaniment is playing.
• For information about FUNCTION parameters, see
"Configuring Function Settings (FUNCTION
EN-53).
Overview and Setup
37 ("Pedal Target") to
Mode)" (page
EN-7