Casio PX-S3100BK User Manual page 30

■ To use the Duet Mode
1.
Hold down the bp^ button until "[FUNCTION]"
appears on the display.
This enters the FUNCTION Mode.
2.
Use the bk U and bl I buttons to select the
following menu items in sequence:
"KEYBOARD" 3 "DUET".
3.
After confirming that "Duet Mode" is displayed,
touch bm ENTER.
4.
Use the bk – and bl + buttons to change the
Duet Mode setting.
• To use the Duet Mode, select either "On" or "Pan" for
this setting. To exit the Duet Mode and return to
normal keyboard play, select "Off".
This setting
Does this:
(displayed):
Off Exits the Duet Mode.
On Enters the Duet Mode.
Pan Outputs left-side keyboard notes from the
left speaker and right-side keyboard notes
from the right speaker while in the Duet
Mode.
5.
To exit the FUNCTION mode, hold down
bp EXIT until "[FUNCTION]" disappears from
the display.
• Some settings become fixed and cannot be changed while
in the Duet Mode.
• The following effects cannot be used while "Pan" is
selected for the Duet Mode setting: Hall Simulator/Reverb
(page EN-21), Surround (page EN-21), Chorus (page
EN-25), Acoustic Simulator (page EN-25).
• In the Duet Mode, the knob set (page EN-26) is
automatically changed to 12 Kbd/Acmp Vol. This knob set
is fixed, and cannot be changed.
■ To change the octaves of the duet keyboards
1.
Perform steps 1 and 2 under
Mode" (page EN-29).
2.
Use the bk U and bl I buttons to display
"Upper Octave" (right-side keyboard) or
"Lower Octave" (left-side keyboard) and then
touch bm ENTER.
3.
Use the bk – and bl + buttons to change the
setting.
• You can specify the right-side keyboard octave while
"Upper Octave" is displayed, and the left-side
keyboard octave while "Lower Octave" is displayed.
• Increasing the setting value by one raises by one
octave, while lowering the value by one lowers by one
octave. The initial default for both settings is 0.
• You can shift the octave of each keyboard within the
range of –2 to +2 octaves.
4.
Touch bp EXIT.
5.
Repeat steps 2 through 4 of this procedure as
required to specify settings for both
keyboards.
Example:
Specifying 0 for "Upper Octave" and 1 for "Lower Octave"
results in the keyboard octaves shown below.
Left keyboard
C4 C5 C6
1 octave higher than initial setting
6.
To exit the FUNCTION mode, hold down
bp EXIT until "[FUNCTION]" disappears from
the display.
Digital Piano Operations
"To use the Duet
Right keyboard
C7 C3 C4 C5
Unchanged
C6
EN-29