Mounting; Mounting Of The Mounting Bracket - Panasonic SF2B-H80SL Instruction Manual

Light curtain

Table of Contents

2-2

Mounting

2-2-1

• For selecting the appropriate mounting bracket matched to the installation

• Do not apply the load such as forced bending to the cable of this device.

• The minimum bending radius of the cable is R6mm. Mount the device

• Mount the emitter and the receiver at the same level and parallel to each other. The effective

aperture angle of this device is ±5° or less for a sensing distance of 3m or more.

• Unless otherwise specified, the following mounting procedure is common for both emitter and

receiver. For the mounting, prepare the mounting holes on the mounting surface by referring to

'3-2 Dimensions'.

Configuration

The standard mounting bracket (MS-SF2B-1) (optional) configures as follows.

1. Fix the standard mounting bracket with two hexagon-socket head bolts [M3 (length:

5mm)]. The tightening torque should be 0.6N·m or less.

2. For side mounting, remove the B part.

environment, the mounting bracket is not incorporated in this device. Please

purchase the optional mounting bracket to fit on the mounting environment.

Applying improper load could cause the wire breakage.

considering the cable bending radius.

- 11 -

Table of Contents