Panasonic SF2B Series Instruction Manual
Light curtain / type2
Hide thumbs
Also See for SF2B Series:
- Instruction manual (30 pages) ,
- Quick instruction manual (100 pages) ,
- Instruction manual (30 pages)
Related Manuals for Panasonic SF2B Series
Summary of Contents for Panasonic SF2B Series
- Page 1 Light Curtain / Type2 SF2B Series Instruction Manual WUME-SF2B-14 2016.1 panasonic.net/id/pidsx/global Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 2 (MEMO) © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 3 Thank you for purchasing Panasonic Industrial Devices SUNX’s Light Curtain, SF2B series. Please read this instruction manual carefully and thoroughly for the correct and optimum use of this device. Kindly keep this manual in a convenient place for quick reference.
-
Page 4: Table Of Contents
3-6 Compatibility ················································································61 Chapter 4 Maintenance ······································································ 62 4-1 Daily Inspection ············································································62 4-2 Periodic Inspection (Every Six Months) ··············································63 4-3 Inspection after Maintenance ···························································63 © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... - Page 5 6-3-2 Side Mounting with Standard Mounting Bracket (MS-SF2B-1) ·········· 76 6-3-3 Mounting Brackets ·································································· 77 Chapter 7 Others ·············································································· 84 7-1 Glossary ·····················································································84 7-2 CE Marking Declaration of Conformity ···············································86 © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
-
Page 6: Chapter 1 Introduction
■ Before using this device, check whether the device performs properly with the functions and capabilities as per the design specifications. ■ In case of disposal, dispose this device as an industrial waste. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... - Page 7 ● Do not use this device in a reflective configuration. ● The corresponding emitter and receiver must have the same serial No. and be correctly oriented. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 8 ● Do not use this device to detect objects flying over the sensing area. ● Do not use this device to detect transparent objects, translucent objects or objects smaller than the specified minimum sensing objects. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
-
Page 9: Applicable Standards / Regulations
2 sets: SF2B-H□ … 64 to 80 beam channels, SF2B-A□ … 32 to 40 beam channels 3 sets: SF2B-H□ … 88 to 96 beam channels, SF2B-A□ … 44 to 48 beam channels □ Instruction Manual (this manual) 1 pc. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... -
Page 10: Chapter 2 Before Using This Device
○ Interference prevention function ○ (up to two sets) (wiring required) ○: Valid, -: Invalid ● Refer to “6-2 Options” for details of options. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... -
Page 11: Part Description
This bracket is to be used for mounting the device having 40 beam channels or more for SF2B-H□, 20 beam channels or more for SF2B-A□. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... - Page 12 3) “When light is blocked” refers to the status that there exists any object blocking light in the sensing area. 4) The description given in [ ] is marked on the device. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
-
Page 13: Protection Area
<Example of Correct Installation> Sensing Protective structure area Dangerous Dangerous part part Sensing area <Example of Incorrect Installation> Sensing Sensing area Dangerous area Dangerous part part © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... -
Page 14: Safety Distance
The max. response time of the machine should be timed with the machine to be actually used. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... - Page 15 : Response time of this device (sec.) SF2B : Additional distance calculated from the size of the minimum sensing object of the device (mm) C = 850 (mm) © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 16 S = 1,600 × T + 128 = 1,600 × 0.4 + 128 = 768 Since this value matches with Case 5) above, S is 768 (mm). © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 17 Since the calculation above is performed by taking 1 (inch) = 25.4 (mm), there is a slight difference be- tween the representation in (mm) and that in (inch). Refer to the relevant standard for the details. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
-
Page 18: Influence Of Reflective Surfaces
Allowable Distance from This Device to Reflective Surface Install in this area Do not install in this area Distance between emitter and receiver L (m) © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... -
Page 19: Device Placement
Position the emitter and receiver so that their cables are aligned. Failure to do so will cause the system to malfunction. Cabel Cabel Cabel Cabel © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... -
Page 20: Mounting
Hexagon-socket head bolt [M3 (length 5mm)] This device 2. For side mounting, remove the B part. Hexagon-socket head bolt [M3 (length 5mm)] B part © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... - Page 21 Note: For the models that the intermediate supporting bracket (MS-SF2B-2) is enclosed with, be sure to use the intermediate supporting bracket (MS-SF2B-2). For details, refer to <When the intermediate mounting bracket (MS-SF2B-2) (accessory) is used>. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 22 Insert a flathead screwdriver into the hole located on the rear side of the C part and tilt it to the rear side of the main body to remove the C part. Flathead screwdriver © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 23 [M5 (purchase separately)]. <For rear mounting> <For side mounting> Hexagon-socket head bolt [M5 (Pur- chase separately)] Hexagon-socket head bolt [M5 (Pur- chase separately)] © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
-
Page 24: Mounting Of The Bottom Cap Cable (Optional)
This device Groove 2. Tighten the two M3 screws. The tightening torque should be 0.3N·m or less. M3 screw Enclosed with the bottom cap cable © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... -
Page 25: Extension And Dismantling Of Sensor (Series Connection)
‘1’ position (on both emitter and receiver). If they are in the position other than the above, the device may not operate properly. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... - Page 26 <Dismantling the cable for series connection> 1. For dismantling the cable for series connection, follow the above procedure of <Construct- ing method for the series connection> in reverse. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
-
Page 27: Wiring
6) In case a surge is generated, take countermeasures such as connecting a surge absorber to the origin of the surge. 7) Power supply unit corresponding to CLASS 2 (only for requiring Mark conformation). © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... -
Page 28: I/O Circuit And Connection
However, be sure to connect the other output to the control equipment. ● In case of using the bottom cap cable (SF2B-CB05-A) (optional), it does not conform to OSHA. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... - Page 29 (Orange) Sync. + (Brown) +V (Shield) (Black) Control output 1 (OSSD 1) (White) Control output 2 (OSSD 2) Load (Yellow-green) External device monitor input (Blue) 0V © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 30 Connect the auxiliary output to the external device monitor input to disable the external device monitor function. Do not connect the load to the auxiliary output when the function is invalid. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 31 (Orange) Sync. + (Brown) +V (Yellow-green) External device monitor input (Black) Control output 1 (OSSD 1) (White) Control output 2 (OSSD 2) Load (Shield) (Blue) 0V © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 32 Connect the auxiliary output to the external device monitor input to disable the external device monitor function. Do not connect the load to the auxiliary output when the function is invalid. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 33 (Gray) Test input (Blue) 0V Make sure to use the auxiliary output to transmit any kind of failure in this device to the control device. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 34 (Purple) Not connected (Shield) (Blue) 0V Make sure to use the auxiliary output to transmit any kind of failure in this device to the control device. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 35 “2” for slave side sensor (on both emitter and receiver). If they are in the position other than the above, the device may not operate properly. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 36 “2” for slave side sensor (on both emitter and receiver). If they are in the position other than the above, the device may not operate properly. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
-
Page 37: Cable Specification
Control output 1 (OSSD 1) Yellow-green External device monitor input Gray (with black stripe) Receiver /Black Orange Synchronization + Orange / Black Synchronization - Blue (Shield) © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... - Page 38 ● For details of the bottom cap cable, the cable with connector on one end, and the cable with connector on both ends, refer to “6-2 Options.” © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
-
Page 39: Series Connection
“1” position (on both emitter and receiver). If they are in the position other than the above, the device may not operate properly. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... -
Page 40: Parallel Connection
For parallel connection, connect the one receiver to the other connection using the interference prevention line as shown in the next page. Wrong connection could generate the non-sensing area, resulting in death or serious injury. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... - Page 41 Notes: 1) The figure above shows the connection pattern for the SF1-CC□A. The pink cable is not used for the NA40-CC□. 2) The figure above shows the connection pattern for the SF1-CC□A. The orange cable is used for the NA40-CC□. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 42 Notes: 1) The figure above shows the connection pattern for the SF1-CC□A. The pink cable is not used for the NA40-CC□. 2) The figure above shows the connection pattern for the SF1-CC□A. The orange cable is used for the NA40-CC□. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
-
Page 43: Series And Parallel Mixed Connection
In case of connecting three sets of sensors in series, it cannot be used in the middle position. Cannot be used for Main sensor SF2B-H8□ (this device) SF2B-A4□ © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... - Page 44 Notes: 1) The figure above shows the connection pattern for the SF1-CC□A. The pink cable is not used for the NA40-CC□. 2) The figure above shows the connection pattern for the SF1-CC□A. The orange cable is used for the NA40-CC□. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 45 Notes: 1) The figure above shows the connection pattern for the SF1-CC□A. The pink cable is not used for the NA40-CC□. 2) The figure above shows the connection pattern for the SF1-CC□A. The orange cable is used for the NA40-CC□. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
-
Page 46: Adjustment
Refer to “2-6-3 Operation” for details. 4. After the adjustment, tighten the hexagon-socket head bolts of the standard mounting brack- et. The tightening torque should be 0.6N·m or less. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... -
Page 47: Operation Test
If the indicators show reception of the light even though the test rod blocks the light, check whether there is any reflective object or extraneous light source near this device or not. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... -
Page 48: Operation
“1”. (This is not an error.) © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... - Page 49 “1”. (This is not an error.) © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 50 Light received status Light blocked 15ms 40 or 60ms or less 40 or 60ms or less or less Control output (OSSD 1 / 2) © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 51 Operation indicator (Red) OSSD indicator (Red) Emission halt indicator Incident light intensity indicator (Green) Fault indicator Fault indicator Synchronization wire Digital error indicator Setting indicator © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 52 OSSD indicator (Red) Emission halt indicator Incident light intensity indicator (Green) Fault indicator Fault indicator Synchronization wire Digital error indicator (Red) Setting indicator (Red) © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 53 2) The frequency selector on the slave side is set to “2”. Both of the setting indicators of the emitter light up and the middle and bottom bars of the digital error indicators of the receiver light up in red. (This is not an error.) © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 54 “1”. (This is not an error.) © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 55 “1”. (This is not an error.) © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 56 (Source of error): The control output (OSSD 1 / 2) short-circuit, extraneous light detection, sensor failure, etc. Refer to “Chapter 5 Troubleshooting” and remove the source of error. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
-
Page 57: Chapter 3 Functions
(OSSD 1 / 2) Do not use the test input (emission halt function) for the purpose of stopping the device on which the SF2B series is mounted. Failure to do so could result in death or serious injury. © Panasonic Industrial Devices SUNX Co., Ltd. 2016... -
Page 58: Auxiliary Output (Non-Safety Output)
40 to 60ms Light Light received received status Light blocked Control output (OSSD 1 / 2) 20ms or less 20ms or less Auxiliary output © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... -
Page 59: Interference Prevention Function
3-4 Interference Prevention Function It is possible to construct the system to prevent malfunction due to interference of the light between SF2B series devices. The interference prevention system can construct max. three sets for series connections (the max. number of the beam channels of SF2B-H□... -
Page 60: External Device Monitor Function
<Timing chart (Error 2)> 40 to 60ms Light Light received received Light status blocked Control output (OSSD 1 / 2) 300ms External device monitor input Lockout state © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... -
Page 61: Compatibility
Refer to “2-5 Wiring” for details of the connecting method. Be sure to use both OSSD 1 and OSSD 2 as control outputs. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... -
Page 62: Chapter 4 Maintenance
The control output (OSSD 1 / 2) must turn OFF when the test input line is open. At this time, the □ effect of external noise can be inspected. In case external noise affects the operation, remove its cause and reinspect. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... -
Page 63: Periodic Inspection (Every Six Months)
5) When the wiring method or wiring layout is changed. 6) When FSD (Final Switching Device) parts are replaced. 7) When FSD (Final Switching Device) setting is changed. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... -
Page 64: Chapter 5 Troubleshooting
Note: Since the color of the operation indicator changes according to ON / OFF status of the control output (OSSD 1 / 2), the operation indicator is marked as “OSSD” on the device. If the device does not work normally after checking the items above, please consult Panasonic Industrial Devices SUNX. -
Page 65: Troubleshooting Of Receiver
The master / slave setting is different. (Beam synchroniza- Set the setting identically. tion using 4-core cable) If the device does not work normally after checking the items above, please consult Panasonic Industrial Devices SUNX. <Indicators in the receiver> <Blink cycle of the fault indicator>... -
Page 66: Chapter 6 Specifications / Dimensions
Number of beam channels H: Beam pitch 20mm A: Beam pitch 40mm Example: SF2B-H56-P Beam pitch: 20mm Number of beam channels: 56 channels Output: PNP output type © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... - Page 67 Weight (total of emitter Approx. 1,900g Approx. 2,100g Approx. 2,300g Approx. 2,500g and receiver) PFHd: Probability of dangerous failure per hour, MTTFd: Mean time to dangerous failure. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 68 Weight (total of emitter Approx. 1,900g Approx. 2,100g Approx. 2,300g Approx. 2,500g and receiver) PFHd: Probability of dangerous failure per hour, MTTFd: Mean time to dangerous failure. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 69 10 to 55Hz frequency, 0.75mm amplitude in X, Y, and Z directions for two hours each Shock resistance 300m/s acceleration (Approx. 30G) in X, Y and Z directions for three times each © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 70 No. The serial No. is indicated on the plates of both emitter and receiver. (Under the model represents the serial No.) © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
-
Page 71: Options
This cable is used for extending the 8-core bottom cap SFB-CC3 Discrete cable. wire For emitter: 8-core shielded cable SFB-CC10 For receiver: 8-core shielded cable © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... - Page 72 This is used for the series connection of several emitters and receivers. SF2B-H40SL SF2B-A20SL SF2B-H48SL SF2B-A24SL SF2B-H56SL SF2B-A28SL SF2B-H64SL SF2B-A32SL SF2B-H72SL SF2B-A36SL SF2B-H80SL SF2B-A40SL SF2B-H88SL SF2B-A44SL SF2B-H96SL SF2B-A48SL © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 73 Model No. Remarks Model No. Remarks This is used for replacing from the This is used for replacing from the MS-SF2B-6 MS-SF2B-7 NA40. SF1-N. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 74 Model No. Remarks Convenient for aligning the beam SF-LAT-2B channels. ● Test rod: 1 pc. Model No. Remarks SF2B-TR47 Test rod for SF2B-A type. ø47mm. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
-
Page 75: Dimensions
SF2B-A4-□ is 22mm. 2) The intermediate supporting bracket (MS-SF2B-2) is enclosed with the devices. The number of the brackets varies depending on the device. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... -
Page 76: Side Mounting With Standard Mounting Bracket (Ms-Sf2B-1)
SF2B-A4-□ is 22mm. 2) The intermediate supporting bracket (MS-SF2B-2) is enclosed with the devices. The number of the brackets varies depending on the device. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... -
Page 77: Mounting Brackets
Material: Stainless steel (SUS304) 2) Standard mounting bracket / MS-SF2B-1(L) <For rear mounting> 16.5 30° 22.5 16.5 30° 13.5 19.3 10.5 20.5 Material: Stainless steel (SUS304) © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... - Page 78 4) Intermediate supporting bracket / MS-SF2B-2 (For side mounting) Material: Stainless steel (SUS304) Intermediate supporting bracket / MS-SF2B-2 (For main body mounting) Material: Stainless steel (SUS304) © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 79 11.5 Material: Stainless steel (SUS304) 7) Mounting pitch conversion bracket for NA40 / SF1-N / MS-SF2B-4 16.5 34.8 30.8 13.8 Material: Stainless steel (SUS304) © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 80 10.5 20.5 Material: Stainless steel (SUS304) <For side mounting> 22.5 16.5 30° 13.5 16.5 30° 26.6 43.25 10.7 10.5 20.5 Material: Stainless steel (SUS304) © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 81 Material: Stainless steel (SUS304) 10) Mounting pitch conversion bracket for NA40 / MS-SF2B-6 (R) 20.5 16.5 15.5 19.5 40.5 40.5 13.5 Material: Stainless steel (SUS304) © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 82 13) Mounting pitch conversion bracket for SF1-N / MS-SF2B-7 (For mounting on the right side and the bottom of the main body) 16.5 15.5 15.5 Material: Stainless steel (SUS304) © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 83 15) Mounting pitch conversion bracket for SF1-N / MS-SF2B-7 (For mounting on the left side and the bottom of the main body) 16.5 15.5 15.5 Material: Stainless steel (SUS304) © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
-
Page 84: Chapter 7 Others
The length from the center of the first beam chan- (Protective height) nel to the center of the last beam channel. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com... - Page 85 The safety device that restarts automatically without any operation PSDI by the operator after the device detects danger status and halts for a while. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
-
Page 86: Ce Marking Declaration Of Conformity
7-2 CE Marking Declaration of Conformity Itemized Essentials of EU Declaration of Conformity Manufacturer’s Name: Panasonic Industrial Devices SUNX Co., Ltd. Manufacturer’s Address: 2431-1, Ushiyama-cho, Kasugai, Aichi 486-0901, Japan EU Representative’s Name: Panasonic Marketing Europe GmbH Panasonic Testing Center EU Representative’s Address: Winsbergring 15, 22525 Hamburg, Germany... - Page 87 Eleventh edition : May 15, 2014 Twelfth edition : December 20, 2014 Thirteenth edition : October 20, 2015 Fourteenth edition : January 15, 2016 © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 88 (MEMO) © Panasonic Industrial Devices SUNX Co., Ltd. 2016 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...
- Page 89 (2) Any Products found to be defective must be shipped to Panasonic Industrial Devices SUNX with all shipping costs paid by Purchaser or offered to Panasonic Industrial Devices SUNX for inspection and examination.
- Page 90 ■ Overseas Sales Division (Head Office): 2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan ■ Telephone: +81-568-33-7861 ■ Facsimile: +81-568-33-8591 panasonic.net/id/pidsx/global For sales network, please visit our website. © Panasonic Industrial Devices SUNX Co., Ltd. 2016 January, 2016 PRINTED IN JAPAN WUME-SF2B-14 Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com...