Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG FSB53907Z
Summary of Contents for AEG FSB53907Z
- Page 1 FSB53907Z User Manual Dishwasher USER MANUAL...
-
Page 2: Table Of Contents
12. TECHNICAL INFORMATION................27 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. - Page 3 ENGLISH of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 • years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a...
-
Page 4: Safety Instructions
If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. WARNING: Knives and other utensils with sharp • points must be loaded in the basket with their points down or placed in a horizontal position. - Page 5 ENGLISH 2.4 Use be replaced, this must be carried out by our Authorised Service Centre. • Do not put flammable products or • Connect the mains plug to the mains items that are wet with flammable socket only at the end of the products in, near or on the appliance.
-
Page 6: Product Description
2.6 Disposal separately: These lamps are intended to withstand extreme physical conditions in household appliances, WARNING! such as temperature, vibration, Risk of injury or suffocation. humidity, or are intended to signal • Disconnect the appliance from the information about the operational mains supply. -
Page 7: Control Panel
ENGLISH 3.1 Beam-on-Floor Beam-on-Floor is off when the appliance is deactivated. Beam-on-Floor is a light displayed on the floor below the appliance door. When AirDry is activated • When the programme starts, a red during the drying phase, the light comes on and stays on for the projection on the floor may duration of the programme. -
Page 8: Programme Selection
Indicator Description Salt indicator. It is on when the salt container needs refilling. Refer to "Be‐ fore first use". Machine Care indicator. It is on when the appliance needs internal clean‐ ing with the Machine Care programme. Refer to "Care and cleaning". - Page 9 ENGLISH 5.4 Programmes overview Pro‐ Type of load Degree of Programme phases EXTRAS gramme soil Quick • Crockery • Fresh • Wash 50 °C • ExtraPower • Cutlery • Intermediate rinse • GlassCare • Final rinse 45 °C • AirDry •...
-
Page 10: Basic Settings
Water (l) Energy (kWh) Duration (min) 1) 2) Programme 10.4 - 12.7 0.83 - 0.96 1h 30min 10.3 - 12.6 0.96 - 1.09 2h 40min 9.8 - 12.0 1.05 - 1.18 10.5 0.848 AUTO Sense 8.7 - 12.0 0.75 - 1.18... - Page 11 ENGLISH You can change the basic settings in To enter setting mode, press and hold setting mode. simultaneously about 3 seconds. When the appliance is in setting mode, The lights related to the Previous, OK the bars of the ECOMETER represent and Next are on.
- Page 12 Water hardness German de‐ French de‐ mmol/l Clarke de‐ Water softener lev‐ grees (°dH) grees (°fH) grees 47 - 50 84 - 90 8.4 - 9.0 58 - 63 43 - 46 76 - 83 7.6 - 8.3 53 - 57...
- Page 13 ENGLISH 6.4 End sound in the same cycle or at the beginning of the next programme. This activity You can activate an acoustic signal that increases the total water consumption of sounds when the programme is a programme by additional 4 litres and completed.
-
Page 14: Before First Use
The latest programme that was When AirDry opens the completed before the appliance door, Beam-on-Floor might deactivation is saved. It is then selected not be completely visible. To automatically after you activate the see if the programme is appliance. -
Page 15: Daily Use
ENGLISH 6. Turn the cap of the salt container CAUTION! clockwise to close the salt container. The compartment (A) is for CAUTION! rinse aid only. Do not fill it Water and salt can come out with detergent. of the salt container when you fill it. - Page 16 For information about the By default, options must be detergent dosage, refer to activated every time before the manufacturer's you start a programme. instructions on the If the latest programme packaging of the product. selection is enabled, the Usually, 20 - 25 ml of gel...
-
Page 17: Hints And Tips
ENGLISH 8.6 How to cancel the delay programme duration. After closing the door, the appliance continues from the start while the countdown point of interruption. operates If the door is opened for more than 30 seconds Press and hold for about 3 seconds. during the drying phase, the The appliance returns to the programme running programme ends. - Page 18 – Use the recommended dosage of 2. Make sure that the salt and rinse aid the detergent and rinse aid. containers are full. – Make sure that the current level of 3. Start the Quick programme. Do not the water softener agrees with the add detergent and do not put dishes hardness of the water supply.
-
Page 19: Care And Cleaning
ENGLISH • Make sure that the spray arms can 2. First remove items from the lower move freely before you start a basket, then from the upper basket. programme. After the programme is completed, water can still 9.6 Unloading the baskets remain on the inside surfaces of the appliance. - Page 20 10.4 External cleaning • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do not use abrasive products, abrasive cleaning pads or solvents. 10.5 Cleaning the filters 4. Wash the filters. The filter system is made of 3 parts.
- Page 21 ENGLISH CAUTION! 3. To install the spray arm back, press it An incorrect position of the downwards. filters can cause bad washing results and damage to the appliance. 10.6 Cleaning the lower spray We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes.
-
Page 22: Troubleshooting
(B) counterclockwise and pull the spray arm downwards. 4. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. Run the water through the holes to wash soil particles away from the inside. - Page 23 ENGLISH Problem and alarm code Possible cause and solution You cannot activate the ap‐ • Make sure that the mains plug is connected to the mains pliance. socket. • Make sure that there is no damaged fuse in the fuse box.
- Page 24 Problem and alarm code Possible cause and solution The level of water inside the • Switch the appliance off and on. appliance is too high. • Make sure that the filters are clean. The display shows iF1. • Make sure that the outlet hose is installed at the right height above the floor.
- Page 25 ENGLISH The PNC can be found on the rating WARNING! plate on the appliance door. You can We do not recommend using also check the PNC on the control panel. the appliance until the Before checking the PNC, make sure the problem has been appliance is in the programme selection.
- Page 26 Problem Possible cause and solution Unusual foam during washing. • Use the detergent designed specifically for dishwash‐ ers. • Use a detergent from a different manufacturer. • Do not pre-rinse dishes under running water. Traces of rust on cutlery.
-
Page 27: Technical Information
ENGLISH 12. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 818 - 898 / 550 Voltage (V) 220 - 240 Electrical connection Frequency (Hz) Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8) Water supply max 60 °C Cold water or hot water... - Page 28 www.aeg.com/shop...