Honeywell T775B Series Instruction Instructions page 32

T775A/B/M SERIES 2000 CONTROLLER
MENU
SCHEDULE
MON-FRI
Fig. 74. Schedule Event Menu (Showing MON-FRI).
MAIN
SCHEDULE
MON-FRI
E1 SETPT
Fig. 75. Schedule - Event 1 Setpoint.
62-0254–03
MENU
SCHEDULE
MON-FRI
E1 SETPT
E1 TIME
E2 SETPT
E2 TIME
EXIT
M24541
MENU
SCHEDULE
MON-FRI
E1 SETPT
SETPOINT
SETBACK
NOT USED
SELECT
SETPOINT
FOR
EVENT 1
M24542
3.3. Setting Individual Schedules
As shown in the Schedule menu (Fig. 69 on page 30),
schedules can be set for the following time periods:
• Monday through Friday
• Saturday and Sunday
• Individual days of the week
1. From the Schedule menu, use the
to highlight the desired time period.
2. Press the button to display the Schedule menu
for the selected time period.
For each selected time period, the schedule event (E1
and E2) parameters are exactly the same as shown in
Fig. 74.
SCHEDULING EXAMPLE
Setting the schedule is independent of the temperature
settings for the relay outputs. The following illustrates a
weekly schedule for daytime (setpoint) and night time
(setback) use and shows the factory default settings:
Table 4. Mon-Fri Schedule Defaults
DAY EVENT
Mon-Fri Event 1 (E1)
Mon-Fri Event 2 (E2)
Sat-Sun Not used; remains in Setback from Mon-Fri
a
Setpoint time span is 6:00 AM until 5:59 PM because
setback starts at 6:00 PM.
b
Setback time span is 6:00PM until 5:59 AM because
setpoint starts at 6:00 AM.
To set a schedule, continue with "3.3.1. E1 SETPT
(setpoint for event 1)".
The following figures show the MON-FRI menu, but the
menu selections are the same for any time period.
3.3.1. E1 SETPT
(setpoint for event 1)
1. From the selected time period menu, use the
buttons to highlight E1 SETPT.
2. Press the button to display the setpoint options.
3. Use the and
option.
4. Press the button to accept the value and return to
the selected time period menu.
32
3. SCHEDULING
and
SETPT ACTION
Setpoint
6:00 AM
Setback
6:00 PM
E2 settings
buttons to highlight the desired
buttons
TIME
a
b
and